Roman Blinds by Tricia Tucker
Roman Blinds - your own fabric, made to measure, delivered to your door

How to Measure:
Measuring Guide

Blind fitted to outside of recess If you want your blind to be fitted OUTSIDE the recess then:
    1. Measure the width of the actual recess plus an additional amount - between 5-10cm (2" - 4") whatever you think looks right
    2. Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add some to the drop - usually 15-20cm (6" - 8")
These sizes you have taken will be the size of the finished blind. The amount of fabric required will be more than this finished size to allow for turnings. To work out the total fabric quantity required, please see Fabric Quantity.
 
Blind fitted to inside of recess If you want your blind to be fitted INSIDE the recess then:
    1. Measure the exact width of the recess in three places - at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size
    2. Measure the exact drop of the recess - again in three places - on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
We will take one cm (half an inch) off the finished width size you have given us, to allow for the blind to pull up and down easily. The amount of fabric required will be more than this finished size to allow for turnings. To work out total fabric quantity required, please see Fabric Quantity.
 
If you are not sure about any of these sizes, or the blinds are to be in a bay window, or if you simply need a helping hand just call us on 020 8398 9646 and we'll help you work it out
Contact Us Other Products Ordering Prices & Fabric Quantities Measuring Home